Last Updated on November 25, 2020
Are you looking for clamp on pallet forks for your tractor or skid steer? Here are the best clamp on pallet forks for both light duty and heavy duty work.
Farmhacker is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no cost to you. As an Amazon Associate, we may also earn from qualifying purchases. Thanks for your support!
If you utilize a tractor with a front end loader or a skid steer then pallet forks can easily become an essential tool on your farm. Not only can you use them to lift pallets but they are also great for hauling logs, brush, firewood, hay, and much more.
There are a few different types of pallet forks. Some pallet forks will replace the bucket on your front end loader or skid steer. You can also get 3 point hitch pallet forks for your tractor.
The pallet forks below actually clamp on to the bucket itself and they work great for most jobs you throw at them. They are also much cheaper than a pallet fork attachment.
Also, some front end loader buckets can’t be swapped with other attachments at all. If that is the case then these are your only option.
With all of that being said, here are our favorite clamp on pallet forks for your tractor or skid steer.
Best Heavy Duty Clamp on Pallet Forks
- Capacity: 4000 lb - Roll back protection slots - Chain holes for secure lifting
- Thick rectangular tube wall - Total weight: 100 lb
- Uses 2 x 3” boards for roll back protection - Total Length: 60 - Fork Length: 43
- Fork Width: 4 - Fork Height: 2
- Bucket lip gap: 2 w/o puck and 1 1/2 with puck - Stabilizer bar: Adjusts from 29 - 44 W (inside the forks)
If you will be doing more heavy lifting on your farm then these Titan Attachments clamp on heavy duty pallet forks are great.
They are rated for 4000 lbs and are very strong.
I personally own these pallet forks and they work great. I primarily use them for hauling feed, moving 275 gallon water totes, and hauling firewood. I have never had a problem with any job I have used them for.
If you are looking for the best clamp on pallet forks then these are it in my opinion.
Second Best Heavy Duty Clamp on Pallet Forks
- YINTATECH 60 clamp on pallet forks are compatible for most loader bucket skid steer tractors. Can carry loads of up to 4000 lbs.
- Simply slide the fork over the cutting edge of the bucket and clamp it down to lock. It can haul logs, lumber, and firewood, move fence posts, hay bales, clear debris and brush, and more.
- Use chain holes to secure and lift heavy objects.
- Use the adjustable stabilizer bar to prevent your forks from spreading apart.
- Total Length: 60, Fork Length: 43, Fork Width: 3.7, Fork Height: 1.97, Bucket lip gap: 2.48, Adjustable stabilizer bar can be adjusted from 18 to 34 W.
If the Titan Attachments clamp on pallet forks are not available then these YINTATECH forks are another option. They have the same rating as the Titans and should get the job done as well.
Best Light Duty Clamp on Pallet Forks
- Capacity: 1500 lb - Roll back protection slots - Chain holes for secure lifting
- Thick rectangular tube wall - Total weight: 100 lb
- Uses 2 x 3” boards for roll back protection - Total Length: 60 - Fork Length: 43
- Fork Width: 3 - Fork Height: 2
- Bucket lip gap: 2 w/o puck and 1 1/2 with puck - Stabilizer bar: Adjusts from 19 - 34 W (inside the forks)
If you will be doing more light lifting and hauling on your farm then these Titan Attachments clamp on light duty pallet forks should work great.
They are rated for 1500 lbs instead of 4000 lbs like their heavy duty counterparts. If you won’t be lifting or hauling more than that then these are a good choice.
Second Best Light Duty Clamp on Pallet Forks
- YINTATECH 60 clamp on pallet forks are compatible for most loader bucket skid steer tractors. Can carry loads of up to 1500 lbs.
- Simply slide the fork over the cutting edge of the bucket and clamp it down to lock. It can haul logs, lumber, and firewood, move fence posts, hay bales, clear debris and brush, and more.
- Use chain holes to secure and lift heavy objects.
- Use the adjustable stabilizer bar to prevent your forks from spreading apart.
- Total Length: 60, Fork Length: 43, Fork Width: 2.95, Fork Height: 1.97, Bucket lip gap: 2.48, Adjustable Stabilizer bar: adjusted from 18 to 34W.
If the Titans aren’t available then these YINTATECH forks are another option. They are also rated for 1500 lbs and are good for light duty work.
Titan Attachments Pallet Forks Video Review